LOG IN BASKET BUSINESS SOLUTIONS
1313-JTEKT
JTEKT

Self aligning ball bearing 1313-JTEKT

65 65 140 140 33 33

Part number : 1313-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Ball Bearing, known as 1313-JTEKT JTEKT, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 33 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot

Description

The Self Aligning Ball Bearing, known as 1313-JTEKT JTEKT, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 33 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    4549250088261
  • INSIDE DIAMETER
    65  MM
  • OUTSIDE DIAMETER
    140  MM
  • THICKNESS
    33  MM
  • LIMITING SPEED
    4300  RPM
  • DYNAMIC LOAD
    61.7  KN
  • STATIC LOAD
    22.9  KN
  • PACKAGING
    1
Description

The Self Aligning Ball Bearing, known as 1313-JTEKT JTEKT, has an inner diameter of 65 mm, an outer diameter of 140 mm and a thickness of 33 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot