LOG IN BASKET BUSINESS SOLUTIONS
21310RZK-H310X-JTEKT
JTEKT

Self aligning roller bearing 21310RZK-H310X-JTEKT

45 45 110 110 27 27

Part number : 21310RZK-H310X-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 21310RZK-H310X-JTEKT JTEKT, has an inner diameter of 45 mm, an outer diameter of 110 mm and a thickness of 27 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot

Description

The Self Aligning Roller Bearing, known as 21310RZK-H310X-JTEKT JTEKT, has an inner diameter of 45 mm, an outer diameter of 110 mm and a thickness of 27 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060789471
  • INSIDE DIAMETER
    45  MM
  • OUTSIDE DIAMETER
    110  MM
  • THICKNESS
    27  MM
  • LIMITING SPEED
    4500  RPM
  • DYNAMIC LOAD
    157  KN
  • STATIC LOAD
    151  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 21310RZK-H310X-JTEKT JTEKT, has an inner diameter of 45 mm, an outer diameter of 110 mm and a thickness of 27 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot