LOG IN BASKET BUSINESS SOLUTIONS
23030-CC-K-W33-SKF
23030-CC-K-W33-SKF
SKF

Self aligning roller bearing 23030-CC-K-W33-SKF

150 150 225 225 56 56

Part number : 23030-CC-K-W33-SKF

SKF
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23030-CC-K-W33-SKF SKF, has an inner diameter of 150 mm, an outer diameter of 225 mm and a thickness of 56 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23030-CC-K-W33-SKF SKF, has an inner diameter of 150 mm, an outer diameter of 225 mm and a thickness of 56 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot
TECHNICAL DATA
  • BRAND
    SKF
  • N° EAN13
    7316576601859
  • INSIDE DIAMETER
    150  MM
  • OUTSIDE DIAMETER
    225  MM
  • THICKNESS
    56  MM
  • LIMITING SPEED
    2400  RPM
  • DYNAMIC LOAD
    510000  KN
  • STATIC LOAD
    750000  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23030-CC-K-W33-SKF SKF, has an inner diameter of 150 mm, an outer diameter of 225 mm and a thickness of 56 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot