LOG IN BASKET BUSINESS SOLUTIONS
23036-CC-K-C3-W33-SKF
SKF

Self aligning roller bearing 23036-CC-K-C3-W33-SKF

180 180 280 280 74 74

Part number : 23036-CC-K-C3-W33-SKF

SKF
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23036-CC-K-C3-W33-SKF SKF, has an inner diameter of 180 mm, an outer diameter of 280 mm and a thickness of 74 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23036-CC-K-C3-W33-SKF SKF, has an inner diameter of 180 mm, an outer diameter of 280 mm and a thickness of 74 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot
TECHNICAL DATA
  • BRAND
    SKF
  • N° EAN13
    7316576603488
  • INSIDE DIAMETER
    180  MM
  • OUTSIDE DIAMETER
    280  MM
  • THICKNESS
    74  MM
  • LIMITING SPEED
    2000  RPM
  • DYNAMIC LOAD
    830000  KN
  • STATIC LOAD
    1250000  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23036-CC-K-C3-W33-SKF SKF, has an inner diameter of 180 mm, an outer diameter of 280 mm and a thickness of 74 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot