LOG IN BASKET BUSINESS SOLUTIONS
24013-CC-W33
24013-CC-W33
24013-CC-W33
GEN

Self aligning roller bearing 24013-CC-W33

65 65 100 100 35 35

Part number : 24013-CC-W33

GEN
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 24013-CC-W33 Generic, has an inner diameter of 65 mm, an outer diameter of 100 mm and a thickness of 35 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot

Description

The Self Aligning Roller Bearing, known as 24013-CC-W33 Generic, has an inner diameter of 65 mm, an outer diameter of 100 mm and a thickness of 35 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

+33.359.36.04.90

Trustpilot
TECHNICAL DATA
  • BRAND
    GEN
  • INSIDE DIAMETER
    65  MM
  • OUTSIDE DIAMETER
    100  MM
  • THICKNESS
    35  MM
  • WEIGHT
    940  G
  • DYNAMIC LOAD
    137  KN
  • STATIC LOAD
    173  KN
  • PACKAGING
    1
  • STANDARD
    No standard
Description

The Self Aligning Roller Bearing, known as 24013-CC-W33 Generic, has an inner diameter of 65 mm, an outer diameter of 100 mm and a thickness of 35 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot